Just recently, renders of the Samsung Galaxy S11 have been leaked online, and today, Samsung Galaxy S11e renders in 3D surfaced online, revealing the early physical appearance and camera module of the smartphone.
The source is again the Onleaks, this time in partnership with Pricebaba, shared the 3D renders of the Galaxy S11e. It is expected that to be the successor of the Galaxy S10e with the most reasonably priced version of the series.
According to the Galaxy S11e renders, it seems like the giant tech will follow the same design for the S11e as the galaxy S11. There is a punch-hole display similar to the Galaxy Note 10, and the Galaxy S11 renders. Apart from the punch-hole, the Galaxy S11e renders reveal a curved display and not a flat one like the S10e. Moreover, the renders also showcase that there will be no bezel around the side of the deAvice with a skinny bezel at the top and the button.
Coming to the camera, as per the Galaxy S11e renders, the company may use the same rear camera module as the Galaxy S11, but with three cameras instead of five along with a LED flash.
According to the sources, the Galaxy S11 may feature a display between 6.2 and 6.3-inches with a body dimension 151.7 x 69.1 x 9.1 mm. A Snapdragon 865 or Exynos flagship SoC may power the phone with at least 6GB RAM or higher and up to 256GB UFS3.0 storage depending upon the RAM. It is expected that the S11e will carry a large 4000mah battery and will run on OneUi 2.0 based on Android 10.
Again we would like to advise that there is no confirmation yet about all these rumored specs. However, the S11e is also expected to feature a 108MP camera, as the most reasonably priced version of the series.