After sharing the CAD renders of the vanilla Samsung Galaxy Tab S7, the trusted tipster OnLeaks has now shared the CAD renders of the upcoming Samsung Galaxy Tab S7+ before its launch. The renders look pretty impressive and share a similar design as the Samsung Galaxy S7 tablet. So, without further ado, let’s talk briefly about the renders, design, and specifications.
According to the CAD renders, the Samsung Galaxy Tab S7+ features large bezels with a thickness of 6.9mm. The bezels on this one are thick enough because of the camera bump. Also, the dimensions of this tablet measures around 285 x 185 x 5.7mm. There is also a front camera present on the size bezel of the Samsung Galaxy Tab S7+. At the rear, the tablet features a dual-camera setup with an LED flash.
Now, let’s talk about the display. The Samsung Galaxy Tab S7+ is rumored to arrive with a 12.4-inch display with a refresh rate of 120Hz. The battery on this one is a 9,800mAh battery with support for 5G networks. Under the hood, the Galaxy Tab S7+ could feature a Qualcomm Snapdragon 865 chipset coupled with 6GB of RAM. Although, there might be other RAM variants that are still yet to be confirmed.
The volume rockers, SIM tray, power button, and a noise cancellation mic is present on the left side of the Samsung Galaxy Tab S7+. Also, you can see a USB Type-C port between the speaker grilles at the bottom of the device in the CAD renders. Not only that but, the Samsung Galaxy Tab S7+ will also arrive with an S-Pen stylus.
Out of the box, the Samsung Galaxy Tab S7+ will run on Android 10. The device has now appeared on the Geekbench website with some key specs. So, you can check the website for more information. However, we advise you guys to take this information as a pinch of salt and stay tuned for more updates.